Temporary grandstands are used at many events: sporting competitions, festivals, concerts, ceremonies, cultural gatherings and professional events. Although they are installed for a limited time, they must keep spectators, employees and other personnel safe throughout their use.
In France, temporary and demountable grandstands are primarily governed by the Order of 25 July 2022 on temporary and demountable structures. It sets requirements for their design, installation, use, maintenance and inspection.
What is a temporary grandstand?
A temporary grandstand, also known as a provisional or demountable grandstand, is a structure installed temporarily to accommodate spectators or participants.
It may include:
- tiered seating;
- seats or benches;
- stairs and circulation routes;
- guardrails;
- ramps;
- a metal framework;
- flooring and risers;
- evacuation and safety provisions.
These structures may be installed outdoors, in a stadium, in a public square, at an event venue or in a premises open to the public.
When installed in a French premises open to the public (ERP), they are also subject to fire and panic safety regulations, in addition to the Order of 25 July 2022.
Which grandstands are covered by the regulations?
The Order of 25 July 2022 applies to temporary and demountable structures throughout their period of use, regardless of where they are installed.
Some installations are excluded or subject to specific rules. These include:
- telescopic grandstands, for which inspection procedures remain regulated;
- single unit grandstands whose highest floor is no more than 1 metre above the ground;
- certain structures covered by the rules for marquees, tents and similar structures;
- certain specific installations identified in the regulations.
Before taking any further steps, it is therefore necessary to identify the grandstand’s type, configuration, height, capacity and installation setting precisely.
Who is responsible for the safety of a temporary grandstand?
Several parties have a role in the safety of a temporary grandstand. The manufacturer, owner, installer and event organiser each have specific responsibilities.
The manufacturer
The manufacturer must provide a technical manual written in French. It must identify the structure’s components, its possible configurations and the procedures for safe assembly and dismantling.
The owner
In particular, the owner must:
- maintain the grandstand in line with the manufacturer’s recommendations;
- keep records of maintenance on its components;
- check the condition of the equipment before making it available;
- provide the installer with the necessary technical documents.
The installer
The installer must:
- use components in good condition;
- have defective parts replaced;
- follow the manufacturer’s technical manual;
- pay particular attention to connections, bracing and components that contribute to stability;
- issue a certificate of correct assembly when the regulations require it.
The event organiser
The event organiser must ensure that the necessary checks are completed before admitting the public. The organiser must also compile and keep a safety file available at the event venue.
What checks are required?
The regulations distinguish between several types of checks and inspections.
1. Design review
Before they are first installed, certain categories of demountable structures must undergo a review of their strength and stability.
This review applies in particular to demountable assemblies in certain regulatory categories, such as OP2, OP3, OS2 and OS3. It is also required when a change affects the structure’s original design.
Depending on the circumstances, the review is carried out by:
- a body approved by the ministry responsible for construction;
- or a body accredited to review the design of demountable assemblies.
For certain categories, including OP1 and OS1, a manufacturer’s declaration may be accepted instead of a design review by an external body.
2. Inspection after assembly
The inspection after assembly checks that the grandstand has been installed correctly and matches the technical documents and planned configuration.
The structure’s safety also depends on the skills of those who install it. Teams carrying out this work can undertake training in grandstand assembly and dismantling to better understand the procedures, safety instructions and good practices that apply to each job.
In particular, the inspection covers:
- the stability and strength of the assembled structure;
- the condition of the ground and supports;
- levelling and load spreading plates;
- framework connections;
- flooring and risers;
- guardrails;
- stairs and ramps;
- exits and circulation routes;
- maximum capacity;
- safety equipment;
- compliance with the safety file.
For certain categories of grandstand, the inspection must be carried out by an accredited body. In other cases, a competent technician may carry it out, particularly for some structures with limited capacity or floor area.
The inspection results in a report stating its conclusion. The report must identify, in particular, the event, organiser, installer, structure inspected and inspector.
3. Inspection before opening to the public
Before anyone is admitted, a visual inspection must be carried out by a competent technician under the operator’s responsibility.
This inspection checks that the grandstand remains in good condition and has no visible defect that could compromise safety.
It may cover, in particular:
- structural components;
- connections;
- ground supports;
- flooring;
- guardrails;
- stairs;
- circulation routes;
- exits and escape routes;
- safety equipment;
- any damage sustained since assembly.
The findings of this inspection must be added to the event organiser’s safety file.
This inspection matters because a grandstand may be compliant when assembled but present a risk before opening because of:
- a change in configuration;
- a component being moved;
- adverse weather;
- damage;
- overloading;
- technical work;
- a defect found during the final preparations.
4. Periodic inspection
Some demountable structures must also be inspected every twelve months.
This requirement applies in particular to demountable assemblies in categories OP2, OP3 and OS3. Depending on the category, capacity or floor area, an accredited body or a competent technician may carry out the inspection.
The periodic inspection produces a report specifying, in particular:
- an opinion on whether the structure may be used;
- the condition of its components;
- any instances of noncompliance;
- corrective measures to be taken.
For a grandstand installed for a short period, the organiser should above all check that maintenance records, previous checks and required inspections are up to date.
What does the postassembly report check?
The report on the inspection after assembly must be detailed enough to identify the structure and show what was checked.
For a grandstand, it may specify:
- its height and span;
- the number of bays;
- the number of rows;
- maximum permitted occupancy;
- make and model;
- component markings;
- the installed configuration;
- the documents reviewed;
- whether assembly complies with requirements;
- the condition of flooring and risers;
- the presence and condition of guardrails;
- stairs, ramps and escape routes;
- alarm and evacuation provisions;
- emergency lighting, where applicable;
- any corrective measures needed.
The report may record various findings, including:
- Satisfactory;
- Unsatisfactory;
- Not applicable;
- Outside the scope of the inspection.
The final conclusion must state whether the demountable assembly receives a favourable or unfavourable assessment for use.
What documents must be prepared?
Before the grandstand is used, the event organiser must compile a safety file that can be consulted at the event venue.
Depending on the circumstances, this file may include:
- the manufacturer’s technical manual;
- the design file;
- an opinion on the standard model or technical file;
- plans and assembly documents;
- the certificate of correct assembly;
- the report on the inspection after assembly;
- previous inspection reports;
- maintenance records;
- the identities of the installer and inspector;
- information about the event;
- operating and evacuation arrangements;
- any repair or modification reports.
The file must be made available to the bodies responsible for checks and inspections.
What should be done after a modification or repair?
A modification or repair may affect the grandstand’s strength and stability.
After a demountable assembly in one of the relevant categories is repaired or modified, a new strength and stability check may be required. Its report must then be added to the safety file.
For structures in certain categories, the manufacturer may certify their strength and stability after the work. Otherwise, a competent approved or accredited body must carry out the check.
It is therefore inadvisable to modify a grandstand, even in a minor way, without first checking the technical and regulatory implications.
Must a temporary grandstand be inspected before every event?
The answer depends on the structure’s category and configuration, and the requirements that apply to its installation.
In practice, the organiser must arrange for:
- an assembly check when required;
- a visual inspection before admitting the public;
- a check that the installed grandstand matches the safety file;
- a fresh assessment after any modification, repair or incident;
- the periodic inspections required by the regulations.
The lack of a recent check does not automatically mean that a new full inspection is unnecessary. The decision must reflect the structure, its configuration and the documents available.
Who may inspect a demountable grandstand?
When the regulations require an accredited body, that body must hold the appropriate accreditation. The Order also sets impartiality and independence requirements for bodies responsible for checking assembly and inspecting structures during use.
A technician carrying out a check or inspection must have the necessary skills. These may be acquired through suitable training. The certificate of competence specified for checking and inspecting demountable assemblies is presumed to satisfy this requirement.
The choice of inspector must therefore take account of:
- the grandstand’s category;
- the nature of the assignment;
- the level of accreditation required;
- independence from the installer;
- experience with temporary and demountable structures.
Key points to check before admitting the public
Before opening the grandstand, a practical check should cover the following points in particular:
Structure and stability
- overall condition of the components;
- absence of damaged parts;
- correctly completed connections;
- bracing in place;
- suitable supports and levelling;
- suitability for the ground conditions;
- absence of movement or subsidence.
Access and evacuation
- accessible stairs and ramps;
- unobstructed escape routes;
- properly distributed circulation routes;
- guardrails in place;
- absence of obstacles;
- visible signs;
- continued access to exits.
Capacity
- correct number of seats;
- compliance with maximum occupancy;
- configuration matching the approved plans;
- no overloading or unplanned additions;
- seats and benches correctly installed.
Operation
- evacuation instructions available;
- working alert systems;
- compliant emergency lighting when required;
- appropriate supervision;
- weather conditions taken into account for an outdoor installation.
Key takeaways
Installing a temporary grandstand involves more than assembling it. Safety must be checked at different stages:
- during design;
- before the first installation;
- during and after assembly;
- before admitting the public;
- after any modification or repair;
- periodically, when the structure’s category requires it.
The organiser must also keep a complete safety file and ensure that checks are carried out by an accredited body or a competent technician when the regulations require it.
A temporary grandstand must therefore be treated as an installation subject to safety requirements, even if it is used for only a few hours or days.
FAQ – Inspection of temporary grandstands
Must a temporary grandstand be checked before use?
Yes. The checks required by the regulations must be completed before the public is admitted. In particular, a visual inspection must be carried out before admission to check the structure’s condition.
Who is responsible for the inspection after assembly?
Depending on the structure’s category, an accredited body or a competent technician may be responsible for the inspection. The organiser must ensure that the work is assigned to someone with the necessary skills and qualifications.
Must an inspection report be kept?
Yes. The report on the inspection after assembly and other relevant documents must be included in the organiser’s safety file, which must be available where the grandstand is used.
Is an inspection needed after a repair?
Yes. A repair or modification may require a new strength and stability check, particularly if it affects important structural components.
Do the regulations apply to grandstands installed in premises open to the public?
Yes. Temporary and demountable structures installed in a French premises open to the public (ERP) are subject to the Order of 25 July 2022 as well as the ERP safety regulations.
Conclusion
Inspecting temporary grandstands is an essential part of preparing an event. It helps ensure that the structure is assembled correctly, stable, suitable for its surroundings and safe for public use.
To arrange an inspection, prepare a safety file or determine the requirements that apply to a temporary grandstand, consult a competent professional and refer to the current version of the regulations.
Note: this article outlines the main principles applicable in France. The exact requirements may vary according to the grandstand’s category, capacity, configuration, location and the nature of the event. The relevant technical file and installation must still be assessed.

